for
further details contact us
for
further details contact us
for
further details contact us
for
further details contact us
for
further details contact us
for
further details contact us
<<
Pages [1]
[2] >>
|
|
|
|
MICANITE
OR BUILT UP MICA
MICA
FOLIUM
MICA
FOLIUM are produced of natural muscovite mica splittings bonded
with either shellac or polyester resins reinforced
on one side with Kraft paper or woven glass fabric/polyester film
based on the required amount of mechanical strength, dielectric
strength and flexibility demanded by the applications. The reinforcing
material not only facilitates easy handling, it provides a high
degree of tensile strength, rigidity, pliability, toughness and
cohesion.
|
|
MICA
LINING MATERIAL
In
crucible type coreless induction furnace, an insulation is of
highest importance to constitute a slip ring and a buffer zone
at
the interface between the coil and the crucible to avoid damage
to the coil. MICAMAFCO have specially developed a new range of
asbestos free cold forming mica insulating products which have
proved to be a most elementary and an economical wrapping material
for crucible formers for coreless induction melting furnaces.
They are an ideal thermal insulation having very high electrical,
mechanical and environmental properties.
|
|
MICA
TAPES
MICA
TAPES are made of muscovite mica bonded with silicone resin to
meet the insulation system for thermal class 'H'. They are produced
in one continuous length without any void and the
layers form a single continuous laminate containing sufficient
solvent to remain soft and flexible. They provide high tensile
and tear strength and permanent resistance to abrasion and permits
the tape to be wound around small electrical parts without flaking
and peeling of the mica. Their important characteristics are its
outstanding voltage endurance, high degree of confirmability,
adhesion of backings and facings, retention of flexibility in
storage, moisture abrasion, chemical actions and proven reliability
|
|
MICA
ROUND TUBES
Mica
Round Tubes are machine made from Muscovite Mica Paper. They are
bonded with fully cured silicone resin system, and have a smooth
finish and abrasion resistance on outside surface.
They meet IEC 371-3-3 standards and are convolute wound to increase
strength and minimize seam lengths. They possess high dielectric
strength, low water absorption and high flexural modus. They are
tough possessing high surface and volume resistivity, high shearing
and tensile strength and chemical stability. They are fire-proof,
moisture-proof and infusible.
|
|
MICA
V-RINGS OR CONES
MICA
V-RINGS are produced in different intricate shapes, size and dimensions
from moulding mica sheets by means of multiple high temperature
pressings for use in commutators of high-voltage dc machines,
slot-cell and slip-rings, etc. They are usually fitted over each
end of the steel V-edge of the commutator to insulate and separate
the copper segments from the support structure.
|
|
MICA
WASHERS BONDED
MICA
WASHERS are punched and stamped from natural muscovite mica sheet
with highly complexed compound dies into specific shape, size
and thickness as per customers specifications. They are punched
to absolute clean edged parts free from burns, delaminations and
cracks.
|
|
|
|
|
|
|